Originally Posted by
Thrunaway300
Building up a Pake c'mute, and i'm trying to install a Sram S300 Crankset (thanks for sending it out so fast Scrod). The problem i'm running into is the Chainring is rubbing on Frame. Never had this problem with this crankset. on other installs. Fram is a 68mm BB shell.
I know not to put any spacers on a GXP BB.
Any Ideas?
Smaller Chainring? 46T?
Can i move the Chainring to the outside of the spindle?
Sram really needs to get their **** together when it comes to their cranks. Their service/warranty dept leaves a lot to be desired too but I won't even get into that here.
The funny thing in this instance is that I know someone who rides a C'mute frame and is using S300s without any trouble. Using a spacer on the drive side isn't usually something I would recommend but if you can install the crank using one without needing to over-tighten the NDS arm to get it to seat properly on the spindle (and crush the bearing in the process), give it a whirl.