Howdy, all. I have a 1987 Fuji Sagres road bike, 57 or 58cm frame size, with various upgrades, some unique custom paint designs on the frame and fork (not my work - it was like that when I purchased it via CL two years ago), and a bit of damage to the top and down tubes near to the head tube. I am hesitant to even try selling the bike, since it's my first road bike, and the first that I've really put a lot of my own work into upgrading and refitting. If I do decide to try selling it, however, I'd like to see if I can get some advice on what it might be worth.
Here are some photos:
I paid $140 for the bike to its previous owner. The only original parts of this bike left now are the frame, fork, stem, and handlebar. The things I added to it include a gently used Shimano Dura-Ace 7400 set comprised of derailleurs, levers/shifters, and crankset (relatively low mileage, obtained via eBay for around $400), and brand new Shimano RS61 TLR wheels (MSRP $499.99). I've also since given it a new Velo Senso Miles R saddle, a new chain and 8-speed Shimano cassette, new Tektro dual-pivot brakes (nutted) with new pads, new Bontrager gelcork bar tape, new cables and housing, bottle cage, and a new zero-offset aluminum Origin8 seatpost (this bit was purely for fitting reasons). It also currently has a pair of Shimano A530 pedals, but I'm undecided on whether I'll leave those on there or switch them out for something else.
Now, here's the problem part... I have had one wipe-out while riding this bike, though as far as I'm aware, I didn't impact anything; however, there is frame damage right up near the head tube that is consistent with a head-on impact. Whether it was like that when I bought it and I simply didn't notice, or it happened at some point later, I honestly don't know. The point is moot, in any case, 'cause it's there.
Here's the damage I'm talking about. There's a bit o' bending 'n' buckling going on.
The frame is made from Fuji's Va-Lite chromoly steel, and there doesn't appear to be any damage to head tube or fork. The bike still rides very well, and I'm not greatly concerned about the frame failing. I do recognize it as a potential issue, though, so I would welcome any input or advice about it. In any case, I'll look forward to hearing what folks around here might think. Cheers!
