Old 08-01-14 | 08:35 AM
  #8  
FBinNY
Senior Member
Titanium Club Membership
15 Anniversary
 
Joined: Apr 2009
Posts: 39,897
Likes: 3,865
From: New Rochelle, NY

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Originally Posted by uoficowboy
So the cogs look OK to me - but my eyes may not be well adjusted for looking. I'll post photos later tonight. I measured 16 links of chain and it was somewhere around 8.1-8.15" long. Looking at Sheldon Brown's article it sounds like it's time to replace my chain, and possibly time to replace my cassette as well. Thoughts?
It MAY be time to replace a chain, and then again it may not. Also, the chain may not be the cause f your problem, and replacing the chain MAY call for a new cassette and again it may not. There are people who spend money on what they MAY need, but I'm not one of them.

If you've decided to replace the chain based on wear. it's strictly up to you. But if you're replacing the chain because it MAY solve your skipping problem, you may be throwing money away unnecessarily.

I mentioned 2 likely causes, one would involving replacing parts, but checking and adjusting trim is FREE and involves only a minute of your time. Since you don't know the exact cause, I think it makes sense to rule out the free one before spending any dough. But I'm kind of tight with repair dough.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Reply