There is only a single standard for 1-1/8" pressed in headsets, so just about any is fine.
The one area of concern is stack height, which does vary between brands and models. If you have more than 10m of spacers above or below your stem, no worries, you can adjust. But if you have very little or none in spacers, then you need to be careful about increasing the stack height.
With that caveat, it's about cosmetics and budget.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.