Originally Posted by
surreal
That's a rike hub; it's got a sprocket bolted onto the DS flange, for the trike's secondary chain which drives the axle. You could probably use this hub, but i've never removed the sprocket and tried to lace a wheel with one.... safr bet would be this:
Sturmey Archer 3 Speed Hub - S-RF3 - £71.99
Same hub, but without the bolt-on trike sprocket. Spaced at 127mm, but easily reduced if need-be.
Or, this:
Sturmey Archer 3 Speed Hub - S-RF3 - £71.99
Essentially, the same hub but with a steel hubshell and a few bucks less. Factory-spaced @118mm, you could easily add spacers to increase this if you need to.
HTH
Rob
Thank you very much. I'm looking at a single speed frame set that has 120mm rear spacing wondering if any of these would fit? Thanks a lot again.deeply appreciated.