I, too, read, then passed info along.. Zip tying the big cassette cog to the spokes will replace the chain whip,
so you can unscrew the lock ring, with that smaller tool.
Probably best to follow multiple suggestions .. dont over tighten the lockring in the 1st place check it before you start.
& then the zip ties 1 per spoke crossing, so 9 on a 36 spoke wheel, 8 on 32.
have not done that myself ..
(new Trekking bike is Rohloff hubed, they have big flanges + are dishless, so less tendency to break drive side spokes)
so easy to pass the spoke thru (disc may have to come off the NDS side , depending on which broke,
But the 4 bolts are same as the chainring uses so disc is easily removed.
derailleur disc bike? Go with centerlock hubs removal tool is also the lockring tool.
Last edited by fietsbob; 10-18-14 at 10:42 AM.