The hoods were in bad shape. Very dried out, so I figured I didn't have much to lose. I started by removing/cleaning the white hoods. Then I sprayed several light layers of Plasti Dip onto the hoods. But I was still getting little holes in the top of the plastic dip due to the uneven surface of the dried out hoods. I then went over the Plastic Dip with some fast drying silicone caulking, which I may have brushed on with a nylon brush if I recall correctly. So far so good, and, with the new coating on the hoods, they actually clean up really easily with Simple Green.

Yes, it's got a heavy coat of wax. There are a lot of areas where the paint has almost entirely faded away. The bike spent far too many years outside, against a wall, unused.