Bike Forums - View Single Post - New chain, new 7s Uniglide cog set, skips on 3rd cog only.

01-22-15 | 11:50 AM

#18

FBinNY

Senior Member

Joined: Apr 2009

Posts: 39,897

Likes: 3,864

From: New Rochelle, NY

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Quote:

Originally Posted by ljsense

op says both the cogs and the chain are new, and the same thing happened on a different cog set that had low mileage

I missed the second "new".

Then it's probably a simple profile or stiff chain issue. Since it's only on a single sprocket, I'd see if I could live with long enough for break-in wear to fix it.

__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.

Reply

0