Joined: Feb 2012
Posts: 19,320
Likes: 5,427
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
There was a thread about this just a few months ago. I suggested using an allen wrench (5mm) held in a bench vice to place the bolt onto. This helps one position every thing together then wind up the spring/plate, press that down to capture it in place and slide the "E" clip in the groove. Actually after you've done a few the procedure is a lot easier then it is to describe what to do. Andy.