Originally Posted by
Andrew R Stewart
First run the cable directly from the BB guide to the anchor bolt and see where the cable needs to be as it passes by the der's stop. If there's a lot of interference then run the cable through the stop. If the cable clears the stop then run the cable direct. let the cable's path determine the route WRT the stop. Andy.
Sounds good to me Andy, thanks. Assuming the cable route needs to go through the stop -- which I believe it will -- should I run the cable naked? I assume this will create some friction between the cable/stop but that it wouldn't be especially problematic (i.e. poor shifting or cause cable fraying.)