Originally Posted by
Midawi
The problem now is I can't remove the drive-side crank arm, because the screw is not centered in the crank, so I can't get a 14mm socket inside to loosen/remove it. With that in the way I can't use the crank puller (not even sure if it is the right tool for these cranks--I had such a hard time getting it in before stripping it).
Since I'll probably replace the cranks and bottom bracket at this point anyway I'm thinking to cut the screw so I can remove it with a standard screwdriver.
What? That makes no sense.
Originally Posted by
Midawi
Am I missing something?
Yes. proper tools and a bike worth using them on...