Originally Posted by
Tradarcher
Hello everyone I am in the process of building a 1x8 road bike out of a cannondale r500 frame. Purchased the bike from a guy before I realized that the majority of the components were in terrible shape. So I count my loss and start building. I am wanting to put the least amount of money in it to ride it. I am wondering if I can use a single speed crank that I have? And also who makes a good budget wheelset? Just looking for some recommendations.
Exactly how trashed are which parts?
-Just about any crank can be used for singlespeed, typically you'll be using the middle chainring position on a triple crank or an outer chainring position on a double. But not always.
-Even if the derailers are thrashed, you can probably use the rear as a chain tensioner (tighten both limit screws to position the derailer exactly where you want it, line the chain up with the cog you want it on) and the front can be use to keep the chain from jumping the chainring (bend it flatter with pliers if you have to)- again, just use the limit screws to position the derailer where you want it. Disconnect/remove the shift cables. You may not actually need to spend anything at all.