Originally Posted by
pontius
My local bike shop sold me an original stronglight crank puller but it is missing the inner bolt that pushes the crank arm off. At the hardware the 10mm bolts were too small and the 12mm bolts seemed to large. The 12mm goes in a turn or so and stops. Maybe the wrong thread pitch? I tried course, fine, and extra fine thread in the 12 mm with no luck.
Does anyone have an original stronglight puller (23.3mm version) that can stick a caliper on the inner bolt and tell me what size it is and what thread pitch if possible? Hopefully this is something I can find available locally if I can figure out what size it is.
Thanks1
Where are you located? I live in north coastal San Diego County and have a standing offer to lend my Stronglight puller and a few other specialty tools.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069