Originally Posted by
shoota
I already have a Stages power meter. So selling that one and using the money to buy the Cannondale one won't cost me much. Not to mention I could get my preferred length of 172.5 this way too. And not mess with adapters, and it's lighter, stiffer, compact bcd, blah blah
Thanks for the info. The new EVOs don't have an alloy shell and this is the problem, it's a different design. There is no slack to take up with the adapter, it's either too loose or too tight, there's no in between.
Maybe you didn't understand my reply.
EVO is PF30, CAAD 10 for example is BB30. Cannondale spec sheet may say EVO is "BB30" but it's a PF30.
PF30 is not the same as BB30.
For GXP, wheelsmfg used to make EITHER BB30 OR PF30 adapters. And then later introduced the universal kit.
So make sure you have the PF30 or the universal kit. The BB30 adapter will not work for EVO.
Then, use a 24mm wavy washer instead of the slim washers to get correct bearing preload.
