Thread: My carbon touring bike story
View Single Post
Old 09-04-15 | 05:36 AM
  #14  
azza_333's Avatar
azza_333
Senior Member
 
Joined: Dec 2014
Posts: 793
Likes: 3
From: Australia

Bikes: A few

Originally Posted by nun
How long are the CF poles for the Big Sky tent? Often the length of the pole sections is a driver in bag design and selection, then you can put the fly in a compression sack. I did my tour with a gear and bag weight of 9kg so I'll be interested to see your 5kg list
My poles are 36cm, so I intend to put them in my frame bag when I make it. As for the bike components list

Bike Parts:
Frame/Fork ICAN AC059 Carbon cyclocross frame (with disc brake mounts, and internal routing of my Di2 cables/junction box/battery/hydrualic lines) Matte UD black
Carbon Matte UD black headset spaces
Carbon Matte UD black Stem
Carbon Matte UD black Aero drop bars (with internal cable routing)
Carbon Matte UD black Seat post
Carbon 3k UD black Seat post clamp
Rims alluminium WTB Frequency CX team i19 2015 700c 32H black
Spokes DT Swiss Comp double butted black 296mm, 295mm, 294mm
Nipples Sapim 12mm brass black
Hubs DT Swiss 240 with center lock (with 9/10mm thrubolts not QR skewers)
100x9mm and 135x10mm thru bolts (not the regular 5mm QR skewers)
Gatorskins 700x28c(I will be swapping to 32c Marathon Supremes for big tours)
Tubes Schwalbe SV18
Disc Rotors Shimano RT99 ICE-TECH Frezza CL 160mm
Carbon Matte UD black saddle with carbon rails (I will be swapping to my Brooks B17 for touring)
Carbon Matte UD black 15g water bottle cages
Shimano Ultegra 6800 11-32 Cassette
Shimano Ultegra Di2 6870 Medium cage rear derailleur
Hydraulic disc brake calipers Shimano BR-RS785
STI shifters Shimano ST-R785 Di2/Hydrualic
Rim tape Vittoria 700x25mm
Bar end plugs Cinelli black
Handlebar tape black LifeLine essential
Shimano Di2 internal seat post battery
Shimano black Brazeon adatper 34.9mm
KMC 11 speed missing link for chain
Deda Di2 Battery adapter for seatpost 31.6mm
Shimano Ultegra 6870 front deraileur
Chain Shimano Ultegra 6800
Shimano E-tube Di2 Grommets 6mm round
Crank Shimano Ultegra 6800 11 speed 172.5mm 34/50 chain rings
Shimano Ultegra 6800 Bottom Bracket english threaded
Fouriers Stem Garmin GPS & gopro mount
Pedals Shimano PD-T780 XT (one side MTB SPD the other flat pedal)
Fenders Blackburn cloudburst mudguards 700x28-37
Shimano Di2 E-tube internal junction box B
Shimano Di2 E-tube 3-port junction box A
A whole bunch of Shimano Di2 E-tube wires

Bike Modifications:

Steerer tube cut down (I left enough excess so my handlebars are at the same level as my saddle for comfort while touring)
Cut the excess of my seat post
Cut about 70mm off my drops of my handlebars as I never use that part of my drops (I left enough on the drops that I can still go onto the drops for a full aero tuck)
I cut the excess off the fender supports
I cut the excess off my hydrualic brake cables

Photos will be uploaded soon.
azza_333 is offline  
Reply
0