If all you are asking about are the tools, that is a different matter. T he Park tool for knocking out the bearings, BB30.3 is reasonably priced on Amazon or ebay, and you can use the fittings from it with a threaded rod and nuts to make you own press kit for BB or PF30. For the 24 mm spindle you are asking about go on ebay for a cheap press setup like this one: 41mm ID Press Fit Bottom Bracket Installation Tool for 24mm Crank Spindles | eBay.

If you ever need to work on a BB30 or PF30 bottom bracket the fittings from the Park removal tool will combine with the rod and nuts from the above press to allow that.