Hello all,

I've accumulated lots of stuff from taking apart several mountain bikes. Nothing fancy but definitely useful stuff if you don't mind doing a bit of cleaning. Looking to sell only as a lot for $75 shipped of $40 picked up in San Diego, CA.

SOLD



Exage 400LX Triple (110/74) 170mm arms* with biopace rings (bolts missing for inner ring)
Mountain LX FD (missing mounting hardware)
Mountain LX RD
Exage 400LX FD (missing clamp bolt)
Exage 400LX RD
4 bottle cages
F/R Exage canti brakes
2 7-sp cassettes (both HG i think)
Stem/Bar/Shifter/Brake Lever setup from a Rockhopper (3x7)
Hi-rise cro-mo quill stem
Forte saddle with cutout
WTB Vigo saddle with Ti rails
Lyotard quill pedals (at least one needs repacking)
Answer TaperLite(?) Fluoro yellow flat bar (25.4)
Black steel flat bar (25.4)
RaceFace AirAlloy low-rise bar (25.4)
Marin low-rise bar (31.8)
Black bar-ends
Black 27.2 seatpost with lots of scratches
Single QR skewer
Whatever else I find

*I remember taking off a crankset like this that had been ridden loose, and the square taper holes were badly deformed. However I just checked this one over and it appears normal, so it must be from a different bike? Either way, consider the crank arms a freebie as I don't have a square taper spindle to mount them on to check the interface.