Originally Posted by
mariachi
Yeah the guy did some good things like proper seat height and fore-aft adjustment, but he was probably thinking about modern compact geometry racing bikes when he was fitting.
Yes, that is my bike the day after the fitting. I have leveled the saddle since then. The stem is from Tange, 85mm 0º. I was thinking about a Technomic either 80 or 70mm plus rando bars. The position on the flats is good enough and by bringing the bars further I'll also be reducing reach. These ones are simply to wide, which also contributes to more reach.
At the moment I'm thinking about going for a Nitto B132. They have more reach than the 135, but the drops are shorter that is nice for the bar-ends and they are slightly more raised (12mm vs 7mm on the 135).
The traditional Technomic is going to raise your bars at least 5 cm from where they are now, which is probably not what you want. I'd look for a Technomic Deluxe, which has an 18 cm quill versus the 22 cm quill of the Tech. I would see you needing to keep the height about where it is now, and just pull the bar back a cm or so.