Originally Posted by
WheresWaldo
You almost have to build in a bit of a fudge factor and make it a tight fit in order for it not to wobble. I learned that lesson the hard way with the ION AIR adapters I made, finally had to make it a few thousandths oversized to get it to fit without wobbling. If you are printing them yourself, maybe scale up a fractional percentage before slicing.
G'day WheresWaldo,
I grabbed a Sony camera (HDR-AZ1) after reading of your positive thoughts on the model in a thread somewhere I think in this forum although not positive.
I know you've pointed out in a post somewhere the mounts for it, but I've read 10 pages of this thread and my eyes are going square and glazing over from all the info.
At this stage I'm thinking of mounting it on my handlebars but am a little undecided.
My bike utilises an aluminium Jeff Jones H-bar which so far only mounts my Garmin Edge.
I remember reading of people being less than impressed with Sony's offerings to mount their cameras.
I did spot your pic in this peruse of the thread of a plastic mount to add the wrist live view remote.
Could you make me some recommendations for mounts that would work for my handlebar and perhaps one that would also work for mounting it on my seat post which is 27.2mm.
I've attempted to read this thread a couple of times but end up leaving it confused and my new camera has been sitting unused now for at least a month.
Thanks if you've time and inclination.
Edit: I spotted the thread with the pics you put up for me finally
http://www.bikeforums.net/electronic...ction-cam.html
Are these still the recommended mounts?