Originally Posted by
TimothyH
Very disappointed with the quality of the SportCrafters product.
The bearings on one of the drums are not pressed correctly. This causes the drum to sit too far to one side so that the end cap retention screw hits the frame and the drum will not spin. The end cap retention screw on the same drum is cross threaded and there is debris rattling around inside the roller.
The correctly pressed bearing is on the right.
-Tim-
It looks like the forward drum is the problem. Just space the nut out with washers until the replacement drum arrives. Tell them that's what you're doing and give a link to your post.
__________________
Results matter