Thread: Ask the Community
View Single Post
Old 04-12-17 | 05:25 PM
  #67  
ninjamunky's Avatar
ninjamunky
Senior Member
 
Joined: Nov 2012
Posts: 55
Likes: 0
From: C'bus

Bikes: cheap ones

Originally Posted by bonsai171
Is a master link ok to use for a 1/8 chain? I know a connecting pin would be stronger, but is there any reason not to use a master link like the one below?

https://www.amazon.com/KMC-Z410NP-Co.../dp/B004JKJLU2

Also, I'm looking at buying a chain tool to replace the chain on my 7 speed rear mtb. Got a 10 speed rear on another bike, and fixed gear with 1/8 chain also. Would the Park CT 3.2 work for all 3 bikes?

Dave
Master links are fine. I've got tens of thousands of miles on motorcycles (street and dirt) using master link chains, and have never experienced a failure. Just make sure it is installed properly, with the open end of the clip facing the opposite direction of the chains travel.

I have no experience with that tool but according to Park it works with all chains except 11-speed Campagnolo.
Last edited by ninjamunky; 04-12-17 at 05:34 PM.
ninjamunky is offline  
Reply
0