Originally Posted by
Masque
There is an interaction between the two shift points; you can't separate them by too much. I've seen this go a little buggy before; I worked around it by creating a new shift profile, which seemed untainted by the problem.
I was able to create the shift profile I wanted on the tablet but then I tried to apply it to the bike, it wouldn't saying it was an invalid configuration. All I am trying to do is to slide the shift down the cassette a gear or two and I maintained the same shift pattern. The default is when the RD gets to gear 2, the next gear change up changes from the large ring to the small ring on the FD and from the 2nd gear to the 4th gear on the RD. I am trying to maintain the same behavior, just sliding it down so when I am in 3rd gear on the RD and I move to the next easier gear, the FD changes to the small and the RD from the 3rd to the 5th.
I also tried sliding the up down a gear first but it didn't make any difference. I thought by creating what I wanted on the tablet, that was creating a new shift profile but when I applied it to the bike it didn't work.