Originally Posted by
dabac
Kinda-sorta, But not quite.
Usually, the quill stem adapters have a top cap held in place by a M6 Allen screw.
Remove this first, and you'll find the thicker and longer wedge bolt below.
Not in this case: I have that quill adapter on the Lemond Zurich I'm building. The screw on the top is connected to the wedge. Loosen that screw and if necessary give it a little tap to unfix the wedge. It should pull right out.
Last edited by WizardOfBoz; 09-18-17 at 08:46 AM.