View Single Post
Old 12-13-17 | 11:05 AM
  #377  
UltraManDan's Avatar
UltraManDan
Senior Member
 
Joined: Sep 2014
Posts: 408
Likes: 2
From: Gainesville, FL

Bikes: 2015 Aventon Diamond

Originally Posted by zubes5280
What kind of GXP BB do you guys run? Put about 1500 miles on the stock GXP BB that came with my S300s and it's started to click when out of the saddle or under heavy load. I've cleaned/re-greased it and made sure everything is tightened down. I know a lot of folks move to square taper cranksets because of similar issues. But for those of you that do run GXP, is it worth upgrading to a nicer Hope/Chris King BB or will I have the same issues based on the GXP design? I'm fine with buying a new cheap BB every 1.5k miles or so, just didn't know if theres a permanent solution other than going with a square taper solution.
My S300's clicked as well and it was loose chainring bolts. Tightenwd down and all good. I swapped the stock BB for the SRAM team GXP and it has been going for 2,000+ miles with no issues at all. I bought it from LBS for around $30, but Im sure you can find cheaper. EBay has been known to have ceramic gxp bb's for cheap as well.
UltraManDan is offline  
Reply