Originally Posted by
TruthBomb
Bad guess, once again. The “problem” is not exacerbated by high pressure.
If it was then my property torqued* valve cores would be unscrewing under the high pressure from my compressor.
The problem is that valve cores that aren’t secured are gripped by the rubber gasket in the hose or adapter.
If they are properly torqued* the gasket isn’t able to unscrew them.
*this isn’t rocket science folks, all you have to do is make them more than finger-tight.
One of these days, you're going to screw a valve core in "more than finger tight" and it's going to come out on you anyhow. You'll be the F-Bomb then.
