Okay, now I'm back to confused again. There does seem to be a a little ring in their holding the bearing in place but it's hard to tell. Will this work to get me back on the road:

https://www.amazon.com/Origin8-Pro-T...set&th=1&psc=1
[MENTION=62196]leob1[/MENTION] thanks for the concern, in no way was I going to use a steel screwdriver to bash anything out of an aluminum tube but this is online so I imagine some would. I have some 3/4" aluminum tube, I was actually going to slot it and make the "rocket" tool. Or use some brass drafts like I was working on a car. Also, on the fork the rust had caused enough issue that the diameter was different and nothing was going to willingly slide back off there without force. I mangled my mallet trying, tapped from the sides, top, bottom, all to the edge of where I was comfortable for the materials I was working with.