Thanks for the tip on the HP material and the model tweak suggestion.
This is my first go around with printing plastic from Shapeways. I have a lot to learn. Unfortunately it's quite expensive once you include the price of shipping. Not sure if I'll make a version 2.0 or try and epoxy the piece I made into the Wahoo mount at this point.
Originally Posted by
WheresWaldo
@Silver Steve,
If you are buying your own designs, use the HP Multi Jet Fusion Printer. It is listed as HP Nylon at the bottom of the model upload page.
Attachment 605215
It is about the same price as Premium Black or White, but it is stronger and has an eggshell finish. I think I had to tweak a few thicknesses on the Wahoo mount so that Shapeways didn't automatically reject the model for wall thickness.
Unfortunately, this is still a Makers Only material, but as soon as it goes public I will disable the Premium Black and White and replace it with the Gray and Black HP Nylon parts in my listings.
Also a suggestion on that model, make your GoPro section a bit shorter, space permitting.