Old 06-02-18, 04:34 PM
  #7  
cycledogg
Senior Member
 
Join Date: Dec 2012
Posts: 1,163
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Likes: 0
Liked 20 Times in 18 Posts
Originally Posted by rm -rf
Yes, just slide the front derailleur up a little to clear the larger chainring.
With a gear calculator, you can get a better idea of the best gearing for you, before you commit to a chainring size.

~~~~

I like the Mike Sherman Gear Calculator to compare different drivetrains. You can change the tooth counts, tire size, and cadence, and the charts update on the fly.
Here's a link to the 11-28 and 34/50 calculator configuration. The URL has the settings, so you can bookmark those settings for later use.

Here's a typical 11-28 11-speed cassette with 34/50, at typical flat road cadences. The small chainring in red, large ring in black.


The 11-28 with a 39/53. (Note: the chart range is extended to 40mph here.)
The most obvious change is that the 39 chainring can go well past 20 mph before you need to shift to the big ring. But the big ring has some large jumps around 20 mph.




I often add a third chainring to do a direct comparison.
Here's 11-28 cassette and 34, 50 and 52 chainrings. You can see the difference is less than a half shift comparing 50 vs 52. That makes sense, since it's 4% higher (divide 52/50) and a typical shift is anywhere from around 6% to 12% depending on the tooth counts.




If you have an idea of your preferred cadences, and typical road speeds, you can see what ranges of speeds you'll get for each chainring. And how low do your gears need to be for the steeper hills you ride?

Maybe a 12-25 for flat areas, or an 11-32 for steeper climbs might be what you want. And Sram has a 11-28 with different tooth counts than Shimano, for closer shifts above 20 mph, but wider gaps from 15-20 mph.

I'm running a custom 14-32, for very close shifts from 18-25 mph, and low hill climbing gears, but it spins out at about 29-30 mph. That's perfect for me. But it's quite annoying on casual rides, where I'm shifting chainrings a lot in the 14-18 mph range.

I wanted very close shift points from around 18 mph to 25 mph, where I was working hard to hang onto the fast-for-me group rides. My other bike has much lower gearing, for all-day rides at a more moderate pace, and easier climbing of long, steep hills.
TMI, I just go with what my legs tell me.
cycledogg is offline