Originally Posted by
Gresp15C
The picture looks like it's taken from the NDS, so it must be a flip-flop hub. Is that right? Are there extra spacers or washers that don't need to be there? Otherwise, I've found that longer solid axles are readily available, just have to be sure of matching the threads. Also, see the thread about track nuts -- the ones with floating washers are indeed preferable, but might have less thread engagement unless you have a longer axle.
It is a flip flop hub. Before the service, I had the axles going all the way thru on both side if I remember correctly. As far as I know, they just lubed and adjusted the bearings. One side has the axle going all the way thru the nut (fixed side), and the other side is what you see in the picture. Should I bring it back to the shop for adjustment, or just leave it alone? The one side had 2 nuts on it, so maybe 1 can be taken off?
Dave