Originally Posted by
scale
looks like its 135.2 between the dropouts and each drop out is 7.5mm wide. That puts me at 150mm end to end and my axle is 145
What a vendor advertises as a 146mm axle IS actually a M10 x 145MM axle.
The extra 1mm covers rounded off edges about a 1/2mm each side...but the actual spec is M10 x 145MM.
That's what is required for a 135mm setup.
4-5mm past the locknuts on each side is all you need. It'll work.
=8-)
__________________
5000+ wheels built since 1984...
Disclaimer:
1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:
Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life