Joined: Feb 2012
Posts: 19,362
Likes: 5,502
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Omar Kheil (Oasis Custom Cycles) made bending bars years ago. The shipping cost more then the steel did. You can see the concaved mitered ends that some have. Above them is a 7/8" bender, it's working end bonded to a narrower tube. This is my general bending section of tools with pry bars, pickle fork, crank arm bender, head tube jack and an early attempt at a stay crimper/channel locks. Not doing much with lugs lately these bending bars are mostly holding down the peg board. Andy
__________________
AndrewRStewart