Old 01-15-19 | 02:05 PM
  #18  
Marcus_Ti's Avatar
Marcus_Ti
FLIR Kitten to 0.05C
 
Joined: Sep 2014
Posts: 5,331
Likes: 408
From: Lincoln, Nebraska

Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2

Originally Posted by noisebeam

Aside from the potential projectile resulting from a melted cartridge seal, wouldn't CO2 extinguish a fire?
Originally Posted by Dan333SP
I was wondering about that. Maybe the cartridges exploded and launched a flaming saddle bag into some dry brush by acting as little rocket motors?
Normal pedestrian Class A fires (like paper or wood)--yes. Which you can use water/CO2 on.

Or Class B/C (gasoline and electrical respectively)...which you use dry chemical or CO2.

But a battery fire is a metal fire. Metal fires are "Class D" Which is its own thing.You don't use water or CO2, you have to use dry powder extinguishers.

https://www.falckproductions.com/res...-a-b-c-d-and-k

https://www.femalifesafety.org/types...nguishers.html

If at your workplace you see fire extinguishers on the wall (hopefully by Code you do)...that is what the "A/B/C" on the side means....you'll virtually never see a Class D or Class K equipment--as those tend to instantly be "call a professional" style emergencies.


Using the wrong equipment can make for massive disasters. The USS Forrestal had a massive fire in 1967 that nearly destroyed the carrier...made worse because emergency fire crews were spraying water at fuel oil fires--doing nothing more than spreading the burning fuel everywhere. Ofc, they were desperate--the professionals on ship were dead or injured, and the proper equipment was the first thing destroyed by ammo explosions.

https://en.wikipedia.org/wiki/1967_USS_Forrestal_fire

Last edited by Marcus_Ti; 01-15-19 at 02:56 PM.
Marcus_Ti is offline  
Reply