Update if not on the wheels then the tape that the NA folks use for builds and tubeless compatible. I bought the wheels in September and have now had to replace the rim tape on each wheel. First the front about a month ago and today the rear. Woke up twice to a flat tire on each. When pumping up it seemed like air was being lost at the valve but in the end the tape was punctured and air coming out of a hole somewhere nearby. With the heat in the desert sealant seems to evaporate pretty quickly too. I’ve replaced the tape with Stan’s and all is well again. I’ve also moved the bike from garage (100+ degrees every day and night) into the house.