I noticed one weird thing with my Sirrus; the bars aren't centered left/right side with respect to the stem centerline. From the center of the stem, the left side is 7mm longer than the right side. Yet, looking at the bar, it is exactly centered based on the printing on the bar (which I acknowledge could be off, but 7mm? No way). See picture below. I took the grips off to confirm I didn't just have a poorly seated grip, and nope. The bars are definitely such that one side is longer than the other with respect to the stem centerline, assuming the logo is printed where it should be on the bars.

You can see that the S is dead center in the little "window" of the stem. There is a little bit of a shadow in the pic, but that "window" is 3/4" wide and the S is absolutely dead center in that window (verified via measurement), as I would expect it to be. However, as long as the bar is set in the stem in that location, the left handlebar measures 7mm longer than the right handlebar. I've measured it 30 different times, 15 different ways, and every time, no matter what, the left bar is 7mm longer than the right bar, so long as the bar and stem meet as shown in the picture (which is of course, how they are intended to meet, hence the "window" to show the Specialized logo. Bizarre, really.