Old 08-22-19, 07:11 AM
  #31  
JonathanGennick 
Senior Member
 
JonathanGennick's Avatar
 
Join Date: Apr 2007
Location: Munising, Michigan, USA
Posts: 4,131

Bikes: Priority 600, Priority Continuum, Devinci Dexter

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 685 Post(s)
Likes: 0
Liked 55 Times in 37 Posts
Originally Posted by teejaywhy
Wondering if they make a floor pump better suited to low pressure / high volume mountain bike tires? more suited than the Joe Blow which sure takes a lot of strokes to pump up my 29x2.3 tires.
Yes, and I LOVE that low-volume pumps are a thing. Fewer strokes to get the air in, and the range on the gauges is a better match for the pressures I'm actually using.

Here are three such low-volume pumps that I personally own and can speak to:

75 psi model from Topeak: https://www.topeak.com/us/en/product...blow--mountain

60 psi model from Lezyne: https://ride.lezyne.com/collections/...sic-over-drive

40 psi model from Specialized: https://www.specialized.com/us/en/ai...=271828-156596

The Lezyne model is probably my favorite of the bunch. The screw on chuck is nice. The Specialized model has the best base and a nice, large gauge. Both the Specialized and the Topeak have air release buttons that allow you to lower your tire pressure after pumping in too much air and overshooting the mark. The Lezyne's air release button releases air from only the hose, not the tire, which is not helpful. The Topeak would benefit from a longer hose and a larger-diameter gauge. The Topeak also has a cheap feel to it, but so far has been working ok. The chuck on the Specialized is finicky to attach to a Schrader valve stem. Specialized's 40-psi range is plenty for my mountain bike tires, but I sometimes need to grab the Lezyne or the Topeak for my commuter bikes.
JonathanGennick is offline  
Likes For JonathanGennick: