Joined: Feb 2012
Posts: 19,344
Likes: 5,461
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
The loosen caliper mounting bolts, squeeze lever and retighten bolts only gets one close many times. I'll slightly loosen one bolt and completely loosen the other bolt then push that end of the caliper into a better position. Slightly snug that bolt back and loosen the first bolt, push that side into place and snug the bolt down a bit. Test and repeat as needed. You're essentially "walking" the caliper one end at a time till the results are a centered pair of pads. Andy
__________________
AndrewRStewart