Originally Posted by
Nessism
There are 30.6 posts on the market, although they tend to be nice and expensive, or lower end. Do an ebay search on "30.6 seat post" and you can see some options. There aren't any high end jobbies there at the moment (other than Thomson's) though. Regarding your "custom seat sleeve" is concern, please explain further. Is this something that goes inside the seat tube? If so, can't you design it for the ID you want to match the seat post of choice?
Thanks for this. I haven't seen or used a 30.6. They must not used used often. We are going with a full ENVE finishing kit and I need a 400mm seat post. ENVE doesn't make a 30.6 post.
My seat sleeve is an external sleeve that will incorporate my logo on the back side of it. I take a piece of .058 and turn it down to .035 before cutting out my logo and design, and braze it on the seat tube. I would think it would add strength in the process.