I think you need a longer spindle. I’m using a TA 344 spindle with my 93 crank. It is 114.5 mm long and places the cranks properly. (The 344 was TA’s spec. in a loose-ball BB for a double crank.). In that era the tapers seem to match. Dunno with new(-ish) cartridge BBs. But 110 is way too short. These old cranks used spindles that were longer on the drive side. So a modern symmetric spindle will have to be even longer to stick out as far on the right side as my 114.5 does. See Sheldon Brown.