Originally Posted by tippy
The CAD unit:
It has a test button that illuminates as either of the two mags pass by their sensor. Wheel sensor works ... flashes green. Pedal sensor ... I don't know. Due to the location of this little light (right beside the pedal pickup), as the pedal passes by the sensor, it also passes by the light, so unless you have room to stick a dental mirror down there while pedalling, you can't see the light even if it were working.
Are you serious about this gripe? I had no issue looking down at an angle to see the LED light when the crank arm passed the sensor. The crank doesn't have to be going fast...the magnet just has to pass the sensor and you can even spin the crank backwards to check it.
__________________
The views expressed by this poster do not reflect the views of BikeForums.net.