Thread: Components
View Single Post
Old 04-23-21 | 01:34 PM
  #5  
Not2bdfeated
Newbie
 
Joined: Apr 2021
Posts: 4
Likes: 0
Originally Posted by Ironfish653
Yes, Microshift is relatively comparable to Shimano. They don't make really high-end stuff like Ultegra and Dura-Ace, but what they do make is very good, and well regarded for the money. Sort of the Hyundai of bike components.
Shimano's Tourney isn't bad-bad, but it's Shimano's bottom-end product.

Most of the components on the two bikes you're looking at are generic, so I can't really say what one is better, but one thing jumps out: The rear wheel : The DBack has a 7-speed freewheel with a nutted axle, an the GT has an 8-sp cassette with a Quick-release hub. That, right there is the quickest, most easily identifiable way to tell a 'cheap' bike from an 'inexpensive' bike.

If your budget can swing it, get the GT.

I can also likely get the GT avalanche 29er. It would be an extra $150 ish for a total of around $680. That’s prolly above what I hoped to pay... but if it’s a better deal... or will last longer or whatever... then I can bite the bullet.
  • FRAME:
  • Frame: 6061-T6 Aluminum Triple Triangle™ Frame, w/ Replaceable Derailleur Hanger, and 1 1/8- 1 1/2" tapered Head Tube
  • Rear Shock:
  • Fork: SR Suntour XCT DS, coil spring with preload, hydraulic lock out, alloy lower legs 100mm travel for 29", disc brake specific
  • Internal Cable Routing: No
  • DRIVETRAIN:
  • Rear Derailleur: microSHIFT, RD-M36, 9-speed
  • Front Derailleur: microSHIFT FD-M43
  • Shifters: microSHIFT TS-39, 9spd
  • Cog Set: microSHIFT CS-H092, 11-34, 9-speed
  • Chain: KMC Z9
  • Crankset: All-Terra Forged Alloy 42/34/24T
  • Bottom Bracket: Cartridge Sealed
  • COMPONENTS:
  • Front Brake: Tektro Hydraulic disc w/ 160mm rotors
  • Rear Brake: Tektro Hydraulic disc w/ 160mm rotors
  • Brake Levers: Tektro Hydraulic
  • Headset: 1 1/8"
  • Seatpost: All-Terra micro adjust alloy seat post, 30.9mm
  • COCKPIT:
  • Handlebar: 6061 Aluminum Riser, 720mm Width, 12mm Rise, 31.8mm Clamp
  • Stem: Alloy 1 1/8" Threadless, 4-Bolt W/ CNC Face Plate, 10° Rise, 31.8mm Clamp
  • Saddle: All-Terra MTB
  • Pedals: Gt Platform pedal
  • Grips: GT Statement logo grips
  • WHEELS/TIRES:
  • Rims: WTB SX19 29" double wall disc specific
  • Front Tire: Transition 29" x 2.25"
  • Rear Tire: Transition 29" x 2.25"
  • Tubeless Ready: No
  • Front Hub: Alloy Disc QR
  • Rear Hub: Alloy Cassette Disc QR
Not2bdfeated is offline  
Reply