Thread: Stubborn quill stem
View Single Post
Old 06-27-21 | 07:28 AM
  #7  
Pop N Wood
Senior Member
 
Joined: Jun 2020
Posts: 1,380
Likes: 537
From: Maryland

Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor

SurferRosa nailed it. Clean it up and check for gouges before trying to reuse. If that one gouge is real bottom of the stem will need to be repaired. If there is sufficient length cut a quarter inch off the bottom of the stem then taper all the sharp edges with fine grit sand paper.
Pop N Wood is offline  
Reply
0