verktyg Good to know, thanks for the reply!
I'm still trying to figure out spindle length I need to get.
Originally Posted by
dddd
Note that a threaded-together bottom bracket intended for 68mm will end up offset 1mm to the right in a 70mm shell. So you'll want to order a 2mm-shorter bottom bracket spindle length than what the crank is spec'd for.
I'm still trying to wrap my head around this. If I understand correctly, for my FC-1050 crank (spec'd at 68x113 or 70x115), I'll need to order a 68x113 bottom bracket, instead of a 68x115 (or 116 since 115 is not available on eBay), due to the spindle being offset 1mm to the right?