Originally Posted by
WheresWaldo
[MENTION=91079]jdoff[/MENTION]
Apparently Cygolite does not list dimensions in their specs so I am going by a guess here, What I have is 43 mm from the center of the rack mounting section to the far left side of the FLY6ce and 25 mm from that same point to the center of the Hotshot, I need to know if that is enough room to mount on the Addit rack. Also everything was kind of a guesstimate since there really aren't any good photos of the Addit installed on a bike (side view, rear view).
This looks pretty close. Here's some photos from my winter beater.
The 100mm width is to the inside of the rails in case it's not clear.
The 60mm is the vertical clearance to the top of my fender. (I have two bikes that would use these mounts; this is the one with the shortest vertical clearance.)
If you can give me the vertical and horizontal offsets to the center of each mount, relative to the center of the rack mounting plate, I should be able to determine whether this will fit.