Originally Posted by
WheresWaldo
jdoff We have:
From the center of the mounting hole to the center of the Cygolite mount is approx 16.25 mm
From the center of the mounting hole to the center of the FLY6ce mount is approx 22.5 mm
Both mounts are centered vertically on the mounting bolt holes
It might be possible to move mount the Cygolite above or inline with the mounting hole if we need more room on that side. With the FLY6ce I do not believe the 40 mm clearance above would allow for moving that section above and there is no way to make it inline because of the design.
You're right, this wouldn't work. Here's another idea. What if we use the outside set of mounting holes? They're 80 mm on center. The mounts can be offset above the holes by 10 mm, and the two mounts can be set 40 mm apart (centered horizontally, my drawing below isn't great). With this layout the right Fly6 button can't be used with them this close (but it doesn't do anything useful) and the Cygolite must be removed before the Fly6 can be rotated to remove it, but these are both fine with me.
For the "centers" of the lights, on the Fly6 I'm assuming the center of the mount, and for the Cygolite I'm assuming about 23 mm from the top of the locking tab (seems like this is roughly the center of the LED). Let me know what you think.