Originally Posted by
sjanzeir
The front and rear adapters may look the same but they won't fit the same way. If yours are indeed the same, then check if they both say "160 F/140 R" on them. You really need to look this over before you spend any more money. Otherwise, just put the Radius back on the rear wheel the way it was and use better pads. (What was wrong with them, anyway?)
And by that I assume you mean "not large enough in diameter," because rotor "thickness" refers to something else.
Not really, especially on a bike this small and this light. All it really needs to do is just work.
As another poster pointed out to me and i verified in the Magura Mt4 manual, they have a wear limit of 1.8mm so they recommend 2.0mm rotors. These are 1.8mm to start with. So im assuming, that will be an issue?
i meant that the adapter on the rear looks to be mirror itself when flipped, so i dont "think" that will solve it. The Radius brakes were inconsistent and spongy. There are no marking at all on the stock adapter.