Spent all morning again trying to figure out what’s going on. Here is another pattern discovered today.

On both front wheels(OEM Fulcrum that came with a Canyon and Aftermarket). Both are symmetrical rims.

When I position the wheel in one orientation, it’s dead Center and when I flip the wheel in the other orientation, it’s off to one side. It’s happening to both wheels and it’s always off to the same side.

So this tells me the dish is not 100% as well but normally when dish is a factor, it would offset to the opposite side off-center when flipped. The fact that it returns to center on one orientation tells me that the fork alignment is at play here and the true center of the fork is off.

let me know what you think..