OK, got a small item to contribute.

Recently I got an axle set (axle/cones/spacers/washer/locknuts) for a Shimano HB-M475 hub.

I don’t own the hub, and probably never will. But getting the locknuts separately – which are thin 10mm x 1mm locknuts that are only 3mm thick – would actually have been more expensive than ordering the axle set. I wanted the locknuts.

I’m keeping the locknuts and spacer washers. The cones and axle are up for grabs. Shimano EV for the hub can be found at

https://si.shimano.com/en/manual/sea..._model=HB-M475

This is one of Shimano’s 10mm QR front axles for 100mm OLD hubs; I’m pretty sure it fits standard front dropouts. I think – but I am not positive – that the axle will fit other similar Shimano front hubs of that era that use such an axle. However, based on perusing Shimano EVs, I think that the cones are probably unique to the HB-M475 (though they might be usable in a pinch with other front hubs using a 10mm axle when using suitable spacers and/or alternate seals).

PM me if you want the axle and cones. First come, first serve.