Pulling this one back out from 2021...

I've always used Avid FR7 or other flatbar levers with the adjustable pull feature. I set it to long pull for full v-brakes and short pull for canti and mini-v brakes.

​​​​​​Today I decided to convert my Rival 2x gravel bike over to a flatbar 1x setup. Took the path of least resistance - pulled my entire bar stem (with grips, shifter, levers attached) cockpit from my 90s hardtail to install onto the gravel bike with mini-vs. Everything went well except I forgot that the levers on the bar were Avid FR5 (long pull, non-adjustable) mated to regular v-brakes and now after the conversion they're mated to mini-vs.

I played around with pad spacing and lever barrel adjuster and the lever feel is pretty good. From what I read and understand on this issue, my levers in theory will pull too much cable for my brakes, yet provide not enough stopping power. Well, it feels pretty good on the stand and I will report back after riding it a bit. I am really hoping the 31mm radius means that the levers will work well enough with the mini-v brakes (Tektro 85mm IIRC).