Originally Posted by
Eyes Roll
When I started this thread, I thought it would be a simple and quick repair by threading in the bottom bracket.
Buying (ordering online and getting them delivered) specific tools takes a few days at least. As I said, I have decided to go on a 70-mile ride tomorrow either on this great gear bike, or on my single speed/fixie bike. I prefer to go on the ride on this bike; hence, I am looking for a quick fix, with the tools I already have with me now.
Thank you everyone for your replies.
🙏
By the way, I am planning to order these two tools 👇 (to use for this bike and two other bikes I own). I am thinking of avoiding to order a hook spanner, since a screw driver and hammer can do the same job that a hook spanner does.
https://www.amazon.com/Oumers-Bike-C...6040724&sr=8-2
https://www.amazon.com/109916-HCW-4-...00AOA2G8&psc=1
What other tools do I need to order? Please post the links of the specific tools I would need to remove and repack my bottom bracket. Thank you.
🙏
If you think a hammer and screwdriver will do, you are confused, if you don't have the correct tools when you need them then you will have problems just as you are now.
The fixed cup needs to be tightened completely then the NDS, other side cup and lockring are carefully adjusted and tightened to hold the correct preload when done properly.
This is only achieved with good tools, lockring and pin spanner used well and takes practice.
Do not skimp or cheap out, when parts are stuck and you are learning, good tools can save you from yourself.
Tools are cheap, good ones are worth it as they can last a lifetime and save headaches for being able to get the job done when the going gets tough.
I would encourage you to find a good condition Sugino set, I have these, Campy and Park in multiples, the Sugino's have served the best for 50 years.