Ugh . . Removing a 6-bolt rotor. Bolts were stuck. Sprayed with PB Blaster, and 4 of them came out. The other two rounded.

I realize now I should have slotted them with the Dremel, but I drilled them out to remove the rotor. Now the studs are still in the hub. I can’t get them with the vice-grips — not enough of the bolt is above the surface. And I don’t want to use the dremel now for the same reason.

What’s next? I sprayed with more PB Blaster in the meantime. I’m thinking a reverse drill bit and extractor is the next thing to try. Any other suggestions?